DYNOJET Ignition Retard Controller for 2009-2011 Honda CBR 600RR

DYNOJET Ignition Retard Controller for 2009-2011 Honda CBR 600RR -Honda limited the power on the US Model 2009, 2010, and 2011 CBR 600RR, so that peak power is approximately 6 HP lower than the unlimited version of the ECU. This was done via modifed ignition timing values in the stock maps of the US spec ECU. The Ignition Retard Controller allows the bike to get the full power as designed by Honda. At low and part throttle, the IRC does not effect the ECU.

DYNOJET HONDA CBR600RR RETARD CONTROLLER INFORMATION

The Ignition Retard Controller maximizes engine performance for a 5-7 HP gain over stock 09-11 Honda CBR 600RR. That's a pretty impressive power boost for only $59.95. The simple, plug-in unit installs in minutes with just a screwdriver and a 5mm hex key. The IRC integrates perfectly with all Dynojet products as well as other aftermarket tuning units.

DYNOJET RETARD CONTROLLER HONDA CBR 600RR FEATURES

NOTE:

• Installing this Honda CBR 600RR unit will make your bike run leaner at 100% throttle from 9500rpm to redline.
• Go into your Power Commander map and add a value of +9 to the existing value of each cell from 9500-13500 rpm in the 100% Throttle column. (i.e. - if at 10000 rpm and 100% Throttle your map currently has a value of 2 adding a +9 will make this cell a 11 when using the Dynojet IRC-1)

HONDA CBR 600RR DYNOJET RETARD CONTROLLER FITMENT

• HONDA CBR 600RR 2009
• HONDA CBR 600RR 2010
• HONDA CBR 600RR 2011

CBR 600RR RETARD CONTROLLER BY DYNOJET OVERVIEW

Also checkout our low priced Dynojet PC5 for the 2009-2011 Honda CBR 600RR (Part# DJ16-001) In another listing. Use our search or bike type pulldown here at ToBeFast.com. Thank You.